patina and rust

HIGH ADHESION

adheres perfectly to the surface, making it suitable for both concrete, wooden, etc.

HIGH FLEXIBILITY

flexible due to which it is suitable for various substrates – from concrete up to floor panels

TRANSFER OF DEFORMATIONS

due to the layer’s thickness, it perfectly reproduces all surface deformations

EASE OF APPLICATION

it is easy to prepare and position – you do not need enormous knowledge and skills to use it

UV RESISTANCE

high resistance to UV radiation, which does not fade and change color with years

STRUCTURE AND COLOR

allows you to shape any texture, structure and color – the only limit is our imagination

AMAZING DECORATIVE EFFECT

MCS RC and MCS PC are ideal for creating unique and special applications on walls in apartments, offices or industrial buildings. The result will certainly satisfy even the most demanding users.

By using a specialized composition based on natural metals, the obtained effects are very realistic.

 

 

THIS IS A REAL CORNER AND A TRUE PATINE

 

 

Effect intensity is controllable due to the use of MCS RA and MCS PA activators. We apply them to the finished coating with the help of an atomizer, brush or sponge, thus allowing the effect activity to be adjusted. It is also possible to use the activator pointwise – this will allow any shaping of the surface of the occurrence of rust or patina.

MCS RC and MCS PC match perfectly with finishes made of natural materials such as wood, metal, glass, bricks. They bring a bit of austerity and industriality to the interior. MCS RC and MCS PC, however, are above all infinite arrangement possibilities.

ADVANTAGES

R

A 1/2 mm material thickness, thus not affecting the structural load of the building

R

Is easily applied and worked and requires no specific tools

R

High adhesion. It covers all surfaces: tiles, marble, stoneware, terrazzo, concrete, gypsum plasterboard, cement and plaster, wood, chipboard, glass, etc.

R

High resistance during use: shocks, scratches and chemicals

R

Non-slip, according to the applied finish

R

Save time and avoid complicated renovation and construction work. No debris

R

Large surfaces without joints

mcs patina

MCS PC is ideal for creating unique and special applications on walls in apartments, offices or industrial buildings. The result will certainly satisfy even the most demanding users.

By using a specialized composition based on natural metals, the obtained effects are very realistic. The intensity of the effect is possible due to the use of MCS PA patina activator. Applying it to the finished coating using an atomizer, brush or sponge allows you to adjust the activity of the effect. It is also possible to use the activator pointwise – this will allow any shaping of the patina surface area.

MCS PC fits perfectly with finishes made of natural materials such as wood, metal, glass, bricks. Introduces a bit of austerity and industriality to the interior. MCS RC, however, is above all infinite arrangement possibilities.

MCS PC is ready for use.

mcs rust

The MCS RC mass is ideally suited for creating unique and special applications on walls in apartments, offices or industrial buildings. The result will certainly satisfy even the most demanding users.

By using a specialized composition based on natural metals, the obtained effects are very realistic. The intensity of the effect is possible thanks to the use of the MCS RA rust activator. Applying it to the finished coating using an atomizer, brush or sponge allows you to adjust the activity of the effect. It is also possible to use the activator point – it will allow any shaping of the surface of the occurrence of rust.

MCS RC fits perfectly with finishes made of natural materials such as: wood, metal, glass, bricks. Introduces a bit of austerity and industriality to the interior. MCS RC, however, is above all infinite arrangement possibilities.

MCS RC is ready for use.

DANE TECHNICZNE

  
Baza chemiczna5-chloro 2-metylo-2hizotiazol-3-onu (pył miedziany - patyna, pył żelazny - rdza)
Uziarnienie< 0,2 mm
Grubość warstwy1 - 1,5 mm
Właściwości roboczedo 30 mint od zmieszania z wodą
Średnia przyczepność> 1,0 MPa (po 28 dniach)
Średnie zużycie 1 l/ 2.5 m2 (faktyczna wydajność będzie się różnic w zależności od rodzaju powierzchni, sposobu aplikacji, jak również intensywności koloru i warunków otoczenia)
Podłoże i jego przygotowaniemusi być nośne (bez luźnych fragmentów), czyste i odtłuszczone. Zalecane zmatowienie i zagruntowanie.
Warunki aplikacjitemp. otoczenia: 5 - 30oC

patina and rust application

It is not necessary to use heavy construction equipment to make a microcement coating. However, you must prepare the basic tools necessary for the correct application. They are: oscillating or eccentric sander, and in the case of floors – polishers (so-called scrubbers) for floors. The industrial vacuum cleaner is very useful. You should also remember about basic tools, such as steel trowels, stucco rolls, etc.

However, the tools are not everything. Experience is also important. In this case, the bigger it is, the more interesting effects you can get.

A very important element in the application of the system is the proper preparation of the substrate. We must remember that the final microcement layer usually does not exceed 3 mm, therefore it is impossible to eliminate the wrong preparation of the substrate. All cracks, defects, etc. must be removed beforehand in such a way that the substrate is perfectly even. Proper preparation of the substrate is an equally important element of the system – almost as important as the microcement layer.

PREPARATION OF THE SUBSTRATE

PREPARATION OF CONCRETE SUBSTRATE

The concrete substrate should be stable and adequately bearable.

Permissible humidity of the substrate must not exceed 4%.

It should be removed mechanically by grinding or grinding all kinds of dirt and old protective coatings. Add cavities to the epoxy resin. For weaker substrates, use a deeply penetrating epoxy resin.

To avoid any problems with the adhesion of microcement to the substrate, it is recommended to use the MCS Quartz Contact strainer.

ATTENTION: Cracks and voids should be repaired before making the main floor.

PREPARATION OF SUBSTRATE FROM OSB BOARDS AND WOOD-BASED MATERIALS

Furniture panels, OSB and other furniture materials should be prepared by primed surfaces in a similar way as during the preparation of concrete substrate. In this case, we simply omit the application of deep penetrating resin. OSB boards should be sanded in order to remove the top impregnating layer on their surface.

PREPARATION OF WALLS AND OTHER VERTICAL AREAS

The surface should be thoroughly vacuumed from all kinds of dust, dirt and debris.

In order to avoid weak MCS RC adhesion problems, it is recommended to use the MCS Quartz Contact strainer.

CONTACT LAYER

CONTACT LAYER

MCS Quartz Contact is a ready-to-use product. Before use, mix the contents of the package until a homogeneous mass is obtained. Apply MCS Quartz Contact application using a brush or roller. Depending on the ambient temperature, let it dry for 4-7 hours.

NOTE: the ambient temperature during the work should be less than + 5 ° C and greater than + 30 ° C.

aplikacja patyny i rdzy

MCS RC is applied by hand, steel floats of various width and length. It should be applied with fast, strong movements – circular or longitudinal. After placing the layer around 1 m2, use the MCS RA activator to force the rust effect. Before applying the applicator, the surfaces immediately adjacent to the MCS RC layer must be protected.

NOTE: do not allow the layer to dry completely before applying the applicator. No rust effect can be achieved on the dried layer.

Put the applicator on the surface using an atomizer (included in the kit, brush or sponge) It is important to ensure that the MCS RA activator application is even and uniform for the whole surface, in order to obtain a better rust effect, you can additionally apply MCS RA.

During work and after finishing, ventilate the rooms until the odor disappears. In case of lack of ventilation or insufficient efficiency, individual respiratory protection should be used.

IMPREGNATION

Impregnation is carried out using a spray primer to close the layer (after applying the primer, additional painting is possible). Dried coatings should be sprayed with varnish and allowed to dry.